loading...
Supply Information
This product is ordered from the original manufacturer and supplied newly manufactured in original manufacturer packaging.
The typical estimated lead time is 20–40 weeks; some parts in short supply may take longer.
Lead times depend on the manufacturer's production schedule and are difficult to predict accurately. We will follow up regularly and make every effort to bring delivery forward.
LT3650EDD-4.2#TRPBF Analog Devices Battery Charger ICs - 1 Reel (2500 pcs)
| Data Sheet | LT3650EDD-4.2#TRPBF Analog Devices Battery Charger ICs - 1 Reel (2500 pcs) |
| Manufacturer | Analog Devices |
| Model | LT3650EDD-4.2#TRPBF |
| Category | Battery Charger ICs |
| Sales Unit | 1 Reel |
| Pack Qty (pcs) | 2500 |
| MOQ (pcs) | 2500 |
| Order Multiple (pcs) | 2500 |
| Device Package | 12-Lead DFN (3mm x 3mm w/ EP) |
| Packing Type | Reel |
| Operating temperature range | -40 to 85 °C |
| Package pin/lead count | 12 pins |
| Package nominal length | 3.0 mm |
| Package nominal width | 3.0 mm |
| Battery float voltage | 4.16 V (Min.) 4.2 V (Typ.) 4.24 V (Max.) full operating-temperature limits, E-grade assurance VIN = 20 V, BOOST-SW = 4 V, SHDN = 2 V, SENSE = BAT = float voltage, CTIMER = 0.68 uF |
| Operating input voltage range | 4.75 to 32 V 7.5 V required for startup operation below start threshold only if BOOST-SW > 2 V |
| Maximum programmable battery charge current | 2 A External current-sense resistor programs constant-current charging up to 2 A single-cell Li-ion/polymer, fixed 4.2 V variant not switch-current limit |
| Features | Programmable Charge Current Up to 2A No VIN Blocking Diode Required 1MHz Fixed Frequency Average Current Mode Control NTC Resistor Temperature Monitor Auto-Recharge at 97.5% Float Voltage Auto-Precondition at <70% Float Voltage Bad Battery Detection with Auto-Reset Binary Coded Open-Collector Status Pins |
| Protection | Programmable Input Current Limit |
LT3650EDD-4.2#TRPBF Analog Devices Battery Charger ICs - 1 Reel (2500 pcs)
| Gross Weight | 1.643 |
|---|