Representative Image Only

S8JX-G15024CD Switching Power Supply NEW

Name: S8JX-G15024CD Switching Power Supply NEW
SKU: S8JX-G15024CD
Price: 143.00 USD
Availability: InStock

$143.00

Qty

Ship to

S8JX-G15024CD OMRON Switching Power Supply NEW

Data Sheet

S8JX-G15024CD Switching Power Supply NEW

Product Description:

Flexible Selection of Reliability and Ease of Operation with the S8JX. New Models with Harmonic Current Suppression for a Broader Lineup.

Specifications:

Input specification			100 to 240 V input
*Power ratings 1**			15 W	35 W
Efficiency			68% min.	73% min.
Input	*Voltage 2**		100 to 240 VAC (allowable range: 85 to 264 VAC, 80 to 370 VDC *9)
	*Frequency 2**		50/60 Hz (47 to 450 Hz)
	*Current 3**	100 V input	0.4 A max.	1 A max.
		200 V input	0.25 A max.	0.6 A max.
	Harmonic current emissions		---
	Leakage	100 V input	0.5 mA max.
	*current 3**	200 V input	1 mA max.
	Inrush current	100 V input	20 A max.
	(for a cold
	start at 25 °C)
	*3	200 V input	40 A max.
Output	*Voltage adjustment range 5**		- 10% to 15% (with V. ADJ) (48-V models: ± 10%)
*4	*Ripple 3**		2% (p-p) max.
	Input variation influence		0.4% max. with AC input voltage
	Load variation influence		0.8% max. (0 to 100% load, rated input voltage)
	Temperature variation influence		0.05%/ ° C max. (at rated input and output)
	Startup time		500 ms max. (up to 90% of output voltage at rated input and output)
	*Hold time 3**		20 ms min.
Additional	*Overload protection 6**		105% to 175% of rated load current, voltage drop, intermittent, automatic reset
functions	*Overvoltage protection 7**		Yes
	Overheat protection		No
	Parallel operation		No (However, backup operation is possible; external diodes required.)
	Series operation		Yes (For up to two Power Supplies; external diodes required.)
	Protective circuit operation indicator		No
Other	Ambient operating temperature		Refer to the derating curve in Engineering Data on Data Sheet (with no icing or
			condensation).
	Storage temperature		- 25 to 65 ° C (with no icing or condensation)
	Ambient operating humidity		25% to 85% (Storage humidity: 25% to 90%)
	Dielectric strength		3.0 kVAC for 1 min. (between all inputs and outputs; detection current: 20 mA)
			2.0 kVAC for 1 min. (between all inputs and PE terminals; detection current: 20 mA)
			1.0 kVAC for 1 min. (between all outputs and PE terminals; detection current: 20 mA)
	Insulation resistance		100 MΩ min. (between all outputs and all inputs/PE terminals) at 500 VDC
	Vibration resistance		10 to 55 Hz, 0.375-mm single amplitude for 2 h each in X, Y, and Z directions
	Shock resistance		150 m/s2 , 3 times each in ± X, ± Y, ± Z directions
	Output indicator		Yes (Color: Green)
	EMI	Conducted	Conforms to EN 55011 Group 1 Class A and based on FCC Class A *9
		Emissions
		Radiated Emissions	Conforms to EN 55011 Group 1 Class A *9
	EMS	Electrostatic	Conforms to EN61000-4-2
		Discharge
		Radiated	Conforms to EN61000-4-3
		Electromagnetic
		Field
		Electrical Fast	Conforms to EN61000-4-4
		Transient/Burst
		Surge	Conforms to EN61000-4-5
		Conducted	Conforms to EN61000-4-6
		Disturbance
		Voltage Dips/	Conforms to EN61000-4-11
		Short Interruptions
	*Approved standards 9**		UL Listed: UL 508 (Listing), UL UR: UL 60950-1 (Recognition)
			cUL Listed: CSA C22.2 No.107.1
			cUR: CSA C22.2 No. 60950-1
			EN/VDE: EN50178 (= VDE 0160) Over voltage category III, EN 60950-1 (= VDE 0805
			Teil 1) (Terminal block: Based on DIN 50274 (VDE 0660-514))
	SEMI		SEMI F47-0200 (200-VAC input)
	*Weight 8**		250 g max.
Input specification			100 to 240 V input
*Power ratings 1**			50 W	100 W
Efficiency		5 V Models	76% min.	76% min.
		12 V Models	81% min.	81% min.
		24 V Models	83% min.	83% min.
		48 V Models	82% min.	83% min.
Input	*Voltage 2**		100 to 240 VAC (allowable range: 85 to 264 VAC, 80 to 370 VDC *9)
	*Frequency 2**		50/60 Hz (47 to 450 Hz)
	*Current 3**	100 V input	1.4 A max.	2.5 A max.
		200 V input	0.8 A max.	1.5 A max.
	Harmonic current emissions		---
	Leakage	100 V input	0.5 mA max.
	*current 3**	200 V input	1 mA max.
	Inrush current	100 V input	20 A max.
	(for a cold
	start at 25 °C)
	*3	200 V input	40 A max.
Output	*Voltage adjustment range 5**		- 10% to 15% (with V. ADJ) (48-V models: ± 10%)
*4	*Ripple 3**		2% (p-p) max.
	Input variation influence		0.4% max. with AC input voltage
	Load variation influence		0.8% max. (0 to 100% load, rated input voltage)
	Temperature variation influence		0.05%/ ° C max. (at rated input and output)
	Startup time		500 ms max. (up to 90% of output voltage at rated input and output)
	*Hold time 3**		20 ms min.
Additional	*Overload protection 6**		105% to 175% of rated load current, voltage drop, intermittent, automatic reset
functions	*Overvoltage protection 7**		Yes
	Overheat protection		No
	Parallel operation		No (However, backup operation is possible; external diodes required.)
	Series operation		Yes (For up to two Power Supplies; external diodes required.)
	Protective circuit operation indicator		No
Other	Ambient operating temperature		Refer to the derating curve in Engineering Data on Data Sheet (with no icing or
			condensation).
	Storage temperature		- 25 to 65 ° C (with no icing or condensation)
	Ambient operating humidity		25% to 85% (Storage humidity: 25% to 90%)
	Dielectric strength		3.0 kVAC for 1 min. (between all inputs and outputs; detection current: 20 mA)
			2.0 kVAC for 1 min. (between all inputs and PE terminals; detection current: 20 mA)
			1.0 kVAC for 1 min. (between all outputs and PE terminals; detection current: 20 mA)
	Insulation resistance		100 MΩ min. (between all outputs and all inputs/PE terminals) at 500 VDC
	Vibration resistance		10 to 55 Hz, 0.375-mm single amplitude for 2 h each in X, Y, and Z directions
	Shock resistance		150 m/s2 , 3 times each in ± X, ± Y, ± Z directions
	Output indicator		Yes (Color: Green)
	EMI	Conducted	Conforms to EN 55011 Group 1 Class A and based on FCC Class A *9
		Emissions
		Radiated Emissions	Conforms to EN 55011 Group 1 Class A *9
	EMS	Electrostatic	Conforms to EN61000-4-2
		Discharge
		Radiated	Conforms to EN61000-4-3
		Electromagnetic
		Field
		Electrical Fast	Conforms to EN61000-4-4
		Transient/Burst
		Surge	Conforms to EN61000-4-5
		Conducted	Conforms to EN61000-4-6
		Disturbance
		Voltage Dips/Short	Conforms to EN61000-4-11
		Interruptions
	*Approved standards 9**		UL Listed: UL 508 (Listing), UL UR: UL 60950-1 (Recognition)
			cUL Listed: CSA C22.2 No.107.1
			cUR: CSA C22.2 No. 60950-1
			EN/VDE: EN50178 (= VDE 0160) Over voltage category III, EN 60950-1 (= VDE 0805
			Teil 1) (Terminal block: Based on DIN 50274 (VDE 0660-514))
	SEMI		SEMI F47-0200 (200-VAC input)
	*Weight 8**		300 g max.	550 g max.
Input specification			100/200 V switchable	100 to 240 V input
*Power ratings 1**			150 W at 5 V	150 W at 12 V	150 W at 24 or 48 V
Efficiency		5 V Models	78% min.	---	---
		12 V Models	---	79% min.	---
		24 V Models	---	---	86% min.
		48 V Models	---	---	85% min.
Input	*Voltage 2**		Switchable between 100 to 120 VAC	100 to 240 VAC
			(allowable range: 85 to 132 VAC) and	(allowable range: 85 to 264 VAC,
			200 to 240 VAC (allowable range: 170	80 to 370 VDC *9)
			to 264 VAC).
	*Frequency 2**		50/60 Hz (47 to 450 Hz)
	*Current 3**	100 V input	3.5 A max.	3.6 A max.	3.5 A max.
		200 V input	2.1 A max.	2.2 A max.	2.1 A max.
	Harmonic current emissions		---
	Leakage	100 V input	0.5 mA max.
	*current 3**	200 V input	1 mA max.
	Inrush current	100 V input	20 A max.
	(for a cold
	start at 25 °C)
	*3	200 V input	40 A max.
Output	*Voltage adjustment range 5**		- 10% to 15% (with V. ADJ) (48-V models: ± 10%)
*4	*Ripple 3**		2% (p-p) max.
	Input variation influence		0.4% max. (with AC input voltage)
	Load variation influence		0.8% max. (0 to 100% load, rated input voltage)
	Temperature variation influence		0.05%/ ° C max. (at rated input and output)
	Startup time		500 ms max. (up to 90% of output voltage at rated input and output)
	*Hold time 3**		20 ms min.
Additional	*Overload protection 6**		105% to 175% of rated load current,	105% to 175% of rated load current,
functions			voltage drop, automatic reset	voltage drop, intermittent, automatic
				reset
	*Overvoltage protection 7**		Yes
	Overheat protection		No
	Parallel operation		No (However, backup operation is possible; external diodes required.)
	Series operation		Yes (For up to two Power Supplies; external diodes required.)
	Protective circuit operation indicator		No
Other	Ambient operating temperature		Refer to the derating curve in Engineering Data on Data Sheet (with no icing or
			condensation).
	Storage temperature		- 25 to 65 ° C (with no icing or condensation)
	Ambient operating humidity		25% to 85% (Storage humidity: 25% to 90%)
	Dielectric strength		3.0 kVAC for 1 min. (between all inputs and outputs; detection current: 20 mA)
			2.0 kVAC for 1 min. (between all inputs and PE terminals; detection current: 20 mA)
			1.0 kVAC for 1 min. (between all outputs and PE terminals; detection current: 20 mA)
	Insulation resistance		100 MΩ min. (between all outputs and all inputs/PE terminals) at 500 VDC
	Vibration resistance		10 to 55 Hz, 0.375-mm single amplitude for 2 h each in X, Y, and Z directions
	Shock resistance		150 m/s2 , 3 times each in ± X, ± Y, ± Z directions
	Output indicator		Yes (Color: Green)
	EMI	Conducted	Conforms to EN 55011 Group 1 Class A and based on FCC Class A *9
		Emissions
		Radiated Emissions	Conforms to EN 55011 Group 1 Class A *9
	EMS	Electrostatic	Conforms to EN61000-4-2
		Discharge
		Radiated	Conforms to EN61000-4-3
		Electromagnetic
		Field
		Electrical Fast	Conforms to EN61000-4-4
		Transient/Burst
		Surge	Conforms to EN61000-4-5
		Conducted	Conforms to EN61000-4-6
		Disturbance
		Voltage Dips/Short	Conforms to EN61000-4-11
		Interruptions
	*Approved standards 9**		UL Listed: UL 508 (Listing), UL UR: UL 60950-1 (Recognition)
			cUL Listed: CSA C22.2 No.107.1
			cUR: CSA C22.2 No. 60950-1
			EN/VDE: EN50178 (= VDE 0160), Over voltage category III, EN 60950-1 (= VDE 0805
			Teil 1) (Terminal block: Based on DIN 50274 (VDE 0660-514))
	SEMI		---	SEMI F47-0200 (200-VAC input)
	*Weight 8**		800 g max.	700 g max.	600 g max.

*1.When a load is connected that has a built-in DC-DC converter, the overload protection may operate at startup and the Power Supply may not start. Refer to Overload Protection in Data Sheet.

*3.Rated input voltage: 100 or 200 VAC at 100% load.

*4.Output characteristics: Specified at power supply output terminals.

*5.If the output voltage adjuster (V. ADJ) is turned, the voltage will increase by more than the allowable voltage range. When adjusting the output voltage, confirm the actual output voltage from the Power Supply and be sure that load is not damaged.

*6.For details, refer to Overload Protection in Data Sheet.

*7.To reset the protection, turn OFF the input power for seven minutes or longer and then turn it back ON.

*8.The weight indicated is for Front-mounting, Open-frame Power Supply.

*9.The range for compliance with EC Directives and safety standards (UL, EN, etc.) is 100 to 240 VAC (85 to 264 VAC).

14-Day Return Policy

Customers have the right to withdraw from the contract within 14 days without providing any reason.
The withdrawal period ends 14 days after the day you receive your order.
Products must be returned in good condition, unused, and in their original packaging, except in cases of quality defects.
Buyers must send the goods back within 14 days after notifying us.
If your order includes multiple items delivered separately, the 14-day period begins when the last item is received.

How to exercise the withdrawal right

To exercise your 14-day withdrawal right, please contact us:
Email:[email protected]
Phone:+86 755-86211480

You may use the model withdrawal form, but it is not mandatory.
Please include:
Your name
Order number
The product(s) you wish to return

Return Address

Please do not return any product without prior confirmation from our customer service.
The confirmed return address (located in Shenzhen, China) will be provided after customer service approval.
Administrative address only - do not send returns here without prior confirmation:
ELECOK CO., LIMITED
Room 1007, Xiwan Building
No. 15 Jinhai Road, Bao'an District
Shenzhen, Guangdong 518102
China

International returns may require longer transit times due to shipping distances and customs clearance procedures.

Liability for Impairment

You are responsible for any reduction in the value of the product resulting from handling that goes beyond what is necessary to determine the nature, characteristics, and proper functioning of the product.

Return Shipping Costs

The buyer is responsible for return shipping costs when exercising the 14-day withdrawal right.

If the product has quality issues, ELECOK CO., LIMITED will cover the return shipping cost.

We recommend that customers keep a proof of shipment when returning a product.

Import duties or import VAT may be charged by customs and are not included in our product prices.

We will also reimburse the cost of the least expensive standard delivery method we offer when the 14-day withdrawal right is exercised, in accordance with applicable EU/EEA rules.

Refunds

Refunds will be issued within 1–2 business days after we receive and inspect the returned item(s), and no later than 14 days from the date we are notified of your withdrawal.

Refunds will be processed using the same payment method used for the original purchase.

No additional fees will be deducted from the refund, except for return shipping costs where applicable.

Exceptions

Custom-ordered or special-order components are non-returnable.

Integrated circuits (ICs) and sensitive components that were soldered, installed, or altered cannot be returned.

Free Replacement or Full Refund Policy

Product cannot be used during the warranty period due to quality issues

Product is damaged during transit

Product is not delivered on time due to reasons on our side

Process for Free Replacement or Full Refund

Buyers contact our customer service by email to describe the problem and provide evidence (clear photos, screenshots, or video)

We will check the problem within 1 working day. For eligible cases, we will process a free replacement or full refund within 1–2 business days

If a return is required, we will cover the return shipping cost

Standard Withdrawal Form

Please do not send packages to the address below without prior confirmation.

— To: ELECOK CO., LIMITED
— Email: [email protected]
— I hereby notify my withdrawal from the contract for the following product(s):
— Order Number:
— Product(s):
— Consumer's Name:
— Consumer's Address:
— Date of Receipt:
— Date of Withdrawal:
— Signature (only if submitted on paper)

Contact Information:
Email: [email protected]
Phone: +86 755-86211480
Company: ELECOK CO., LIMITED