loading...
SHL-Q55 OMRON Travel Switch NEW
| Data Sheet | SHL-Q55 Travel Switch NEW |
OMRON Travel Switch SHL-Q55
Product Description:
Approved by EN, UL, CSA, and CCC (Chinese standard). (Ask your OMRON representative for information on approved
models.)
Incorporates a switch with a durable coil spring in a tough, highprecision case.
Models for microloads and models with operation indicators added to series.
Terminal protective cover can be switched to wire cable from either the left or right.
Sealing characteristics that meet IEC IP67 degree of protection.
Specifications:
| Degree of protections | IP67 (EN60947-5-1) | |
| Durability | Mechanical | 10,000,000 operations min. |
| Electrical | 500,000 operations min. | |
| Operating speed | 0.1 mm/s to 0.5 m/s (hinge lever models) | |
| Operating | Mechanical | 120 operations/min |
| frequency | Electrical | 30 operations/min |
| Rated frequency | 50/60 Hz | |
| Insulation resistance | 100 MΩ min. (at 500 VDC) | |
| Contact resistance | 15 mΩ max. (initial value for the built-in switch when tested alone) | |
| Dielectric | Between terminals of the same polarity | 1,000 VAC, 50/60 Hz for 1 min |
| strength | Between each terminal and non- | 2,000 VAC, 50/60 Hz for 1 min/Uimp at 2.5 kV (EN60947-5-1) |
|
| current-carrying metal part | |
| Rated insulation voltage (Ui) | 150 V (EN60947-5-1) | |
| Pollution degree (operating environment) | 3 (EN60947-5-1) | |
| Short-circuit protective device (SCPD) | 10 A fuse type gI or gG (IEC60269) | |
| Conditional short-circuit current | 100 A (EN60947-5-1) | |
| Conventional enclosed thermal current (Ithe) | 5 A (EN60947-5-1) | |
| Protection against electric shock | Class II (grounding not required with double insulation) | |
| OFF reverse voltage | 1,000 VAC max., 300 VDC max. (EN60947-5-1) | |
| Vibration | Malfunction | 10 to 55 Hz, 1.5-mm double amplitude |
| resistance | ||
| Shock | Destruction | 1,000 m/s2 min. |
| resistance | Malfunction | 300 m/s2 min. |
| Ambient operating temperature | -10°C to +80°C (with no icing) | |
| Ambient operating humidity | 35% to 95%RH | |
| Weight | Approx. 62 to 72 g | |
Note:
1.The figures at the left are initial values.
2.The ratings at the left may vary depending on the model. Contact your OMRON representative for further details.
*1.The head section of the plunger type SHL-D(Q)[][] is excluded.
*2.Durability values are calculated at an operating temperature of +5°C to +35°C, and an operating humidity of 40% to 70%RH.
*3.The values are for the plunger-type models.
В следните случаи ще направим безплатно преиздаване или пълно възстановяване на сумата:
Продуктът не може да бъде използван по време на гаранционния период поради проблеми с качеството на продукта
Продуктът е повреден по време на транспортирането
Продуктът не е доставен навреме поради наша грешка
Процес на безплатно преиздаване или пълно възстановяване на сумата:
Купувачите изпращат имейл до нашия обслужващ персонал, за да опишат проблема и предоставят доказателства (ясни снимки, снимки на екрана или видео)
Ще проверим проблема в рамките на 1 работен ден. За квалифицираните случаи ще осигурим безплатна замяна или пълно възстановяване на сумата в рамките на 1-2 работни дни
Ако е необходимо връщане, разходите за връщане на стоката ще бъдат платени от нас
SHL-Q55 Travel Switch NEW
| Gross Weight | 0.1 |
|---|