loading...
TL-Q5MB1 Omron Proximity Sensor NEW
| Data Sheet | TL-Q5MB1 Proximity Sensor NEW |
Product Description and Specifications:
Technical characteristics
• TL-N / TL-Q / TL-G is the inductive proximity sensor
• Sensing distance: 5 ... 20 mm
• The sensor type is not covered
• Frequency response: DC 40 ... AC 10Hz or 500 Hz max.
• Supply voltage: 12-24 VDC
• Connectivity: Wireless connectivity is available, DC 2 - wire or 3-wire DC or 2-wire AC
• Control output: current 0 ... 100mA
• outputs: NPN / PNP, NO / NC
| Type | Unshielded |
| Sensing method | Inductive type |
| Sensing distance | 5 mm -10% to +10% |
| Setting distance | 0 to 4 mm |
| Differential distance | 10% Max. of sensing distance |
| Sensing object | Ferrous metal (Sensitivity lowers with non-ferrous metals.) |
| Standard sensing object | Iron 15*15*1mm |
| Response frequency | DC: 500 Hz (average) |
| Response time | 2 ms Max. |
| Power supply voltage | 12 to 24 VDC (ripple(p-p) :10% Max.) |
| Operating voltage range | 10 to 30 VDC |
| Current consumption | 10 mA Max. (at 24VDC) |
| Control output (Output type) | PNP open collector output |
| Control output (Switching capacity) | 0 to 50 mA (at 30VDC) |
| Control output (Residual voltage) | (DC) 1 V Max. （under load current with cable length of 2m） |
| Indicator | Detection indicator(red) |
| Operation mode | NO |
| Protective circuit | Surge suppressor |
| Standard or Different frequency | Standard |
| Ambient temperature | Operating: -25 to 70 CEL |
| Ambient humidity | Operating: 35 to 95 %RH |
| Temperature influence | +-20% Max. of sensing distance in temperature range of -25 to +70CEL |
| Voltage influence | +-2.5% Max. of sensing distance in rated voltage range +-10%. (As the basis for sensing distance at standard power voltage) |
| Insulation resistance | 5 M OHM Min. at 500VDC between charged parts and the case |
| Dielectric strength | 500 VAC 50/60 Hz for 1 minute between charged parts and the case |
| Vibration resistance | 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
| Shock resistance | 200m/s2 for 10 times each in X, Y, and Z directions |
| Degree of protection | IEC60529: IP67 |
| Applicable standard (EC Directive (Low Voltage Directive)) | EN60947-1 |
| Applicable standard (EC Directive (EMC Directive)) | EMI: EN60947-5-2 |
| Applicable standard (CCC mark) | Not equipped |
| Connection method | Pre-wired models (Cable length: 2 m) |
| Weight (Packed state) | approx. 60 g |
| Material (case) | Heat-resistant ABS resin |
| Material (sensing surface) | Heat-resistant ABS resin |
| Accessories | Not equipped |
14-Day Return Policy
Customers have the right to withdraw from the contract within 14 days without providing any reason.
The withdrawal period ends 14 days after the day you receive your order.
Products must be returned in good condition, unused, and in their original packaging, except in cases of quality defects.
Buyers must send the goods back within 14 days after notifying us.
If your order includes multiple items delivered separately, the 14-day period begins when the last item is received.
The withdrawal period ends 14 days after the day you receive your order.
Products must be returned in good condition, unused, and in their original packaging, except in cases of quality defects.
Buyers must send the goods back within 14 days after notifying us.
If your order includes multiple items delivered separately, the 14-day period begins when the last item is received.
How to exercise the withdrawal right
To exercise your 14-day withdrawal right, please contact us:
Email:[email protected]
Phone:+86 755-86211480
You may use the model withdrawal form, but it is not mandatory.
Please include:
Your name
Order number
The product(s) you wish to return
Return Address
Please do not return any product without prior confirmation from our customer service.
The confirmed return address (located in Shenzhen, China) will be provided after customer service approval.
Administrative address only - do not send returns here without prior confirmation:
ELECOK CO., LIMITED
Room 1007, Xiwan Building
No. 15 Jinhai Road, Bao'an District
Shenzhen, Guangdong 518102
China
International returns may require longer transit times due to shipping distances and customs clearance procedures.
Liability for Impairment
You are responsible for any reduction in the value of the product resulting from handling that goes beyond what is necessary to determine the nature, characteristics, and proper functioning of the product.
Return Shipping Costs
The buyer is responsible for return shipping costs when exercising the 14-day withdrawal right.
If the product has quality issues, ELECOK CO., LIMITED will cover the return shipping cost.
We recommend that customers keep a proof of shipment when returning a product.
Import duties or import VAT may be charged by customs and are not included in our product prices.
We will also reimburse the cost of the least expensive standard delivery method we offer when the 14-day withdrawal right is exercised, in accordance with applicable EU/EEA rules.
Refunds
Refunds will be issued within 1–2 business days after we receive and inspect the returned item(s), and no later than 14 days from the date we are notified of your withdrawal.
Refunds will be processed using the same payment method used for the original purchase.
No additional fees will be deducted from the refund, except for return shipping costs where applicable.
Exceptions
Custom-ordered or special-order components are non-returnable.
Integrated circuits (ICs) and sensitive components that were soldered, installed, or altered cannot be returned.
Free Replacement or Full Refund Policy
Product cannot be used during the warranty period due to quality issues
Product is damaged during transit
Product is not delivered on time due to reasons on our side
Process for Free Replacement or Full Refund
Buyers contact our customer service by email to describe the problem and provide evidence (clear photos, screenshots, or video)
We will check the problem within 1 working day. For eligible cases, we will process a free replacement or full refund within 1–2 business days
If a return is required, we will cover the return shipping cost
Standard Withdrawal Form
Please do not send packages to the address below without prior confirmation.
— To: ELECOK CO., LIMITED
— Email: [email protected]
— I hereby notify my withdrawal from the contract for the following product(s):
— Order Number:
— Product(s):
— Consumer's Name:
— Consumer's Address:
— Date of Receipt:
— Date of Withdrawal:
— Signature (only if submitted on paper)
TL-Q5MB1 Proximity Sensor NEW
| Gross Weight | 0.1 |
|---|